Reverse Mount shades are popular for window and doors because there is less space between the shade and the window glass. The pictures below show how to mount to the reverse of the EZ-Rig Shade system.
Loop strip is sewn to the top of the shade on the front and is then attached to the hook strip on the track of the system.
When fabricating small grommets will need to be added under the system to allow the lift cord to pass from the reverse side up into the drums. Ceiling brackets are used under the valance mount board to attach the track. Angle irons are used to attach the mount board to the window or door.
To see videos about the EZ-Rig Shade System visit www.RowleyCompany.com and click on "Video Solutions" at the bottom of the home page.